Skull crushers are a strength-training exercise that targets the triceps, the muscles along the back of your upper arms. Also called lying triceps extensions, they involve bending your elbows to lower a weight toward your forehead or behind your head, then straightening your arms to lift it again. You can perform them with dumbbells, an EZ curl bar, a straight barbell, or a cable machine. Their biggest advantage is that they let you train your triceps directly without relying heavily on your chest or shoulders. Whether you’re new to lifting or looking to build bigger arms, proper technique and manageable resistance matter more than simply lifting heavier.
What Are Skull Crushers?
Skull crushers are an isolation exercise designed to develop triceps strength and muscle size through elbow extension. Unlike bench presses and push-ups, which involve movement at both the shoulders and elbows, this exercise concentrates most of the movement at the elbow joint.
The unusual name comes from the path of the weight. In the traditional version, you lower a bar toward your forehead before lifting it back up. The weight should never touch your head.
Although commonly performed on a flat bench, this exercise can also be adapted to an incline bench or the floor.
Skull Crushers Muscles Worked
The primary muscle involved is the triceps brachii, which has three heads. All three contribute to straightening your elbows.
| Muscle | Role During the Exercise |
| Long head | Extends the elbow and crosses the shoulder joint. |
| Lateral head | Contributes to elbow extension. |
| Medial head | Assists elbow extension throughout the movement. |
| Forearm muscles | Help maintain grip and wrist stability. |
| Shoulder stabilizers | Help keep the upper arms steady. |
The long head is particularly interesting because its length changes with shoulder position. Angling your upper arms slightly toward your head can place it in a more stretched position.
A study published in the European Journal of Sport Science found greater triceps growth from overhead cable extensions than from extensions performed with the arms at the sides. However, the study did not directly compare skull crushers, so it cannot establish which lying variation produces the most muscle growth.
How to Do Skull Crushers in 5 Steps
Start with a light EZ bar or a pair of dumbbells and a stable flat bench. These instructions describe the traditional forehead version. You can also explore PureGym’s behind-the-head skull crusher demonstration for an alternative technique.
Step 1: Set Up on the Bench
Lie on your back with your head supported and feet firmly planted on the floor. Grip the bar approximately shoulder-width apart, wrapping your thumbs around it. With dumbbells, you can keep your palms facing each other.
Step 2: Raise the Weight
Bring the weight toward your chest and press it upward until your arms are extended above your shoulders. Keep your wrists aligned with your forearms and your shoulders steady. This is your starting position.
Step 3: Lower the Weight Slowly
Bend your elbows and lower the weight toward your forehead. Keep your upper arms relatively still and breathe in as you lower. Stop before the weight touches your head or before you lose control.
Step 4: Straighten Your Elbows
Exhale as you extend your elbows to return the weight to its starting position. Avoid swinging your shoulders or using momentum. Straighten your arms comfortably without forcefully snapping your elbows into lockout.
Step 5: Finish the Set Safely
Repeat for your planned number of repetitions. When finished, carefully bring the weight toward your chest before sitting up, or ask a spotter to help return the bar to the rack. Avoid attempting another repetition if you cannot complete it safely.
Best Skull Crushers Variations
Different equipment changes how the exercise feels. Choose a variation that suits your experience, available equipment, and wrist comfort.
| Variation | What Makes It Different |
| Dumbbell skull crushers | A neutral grip allows independent arm movement and greater flexibility in wrist position. |
| EZ bar skull crushers | Angled handles may offer a more comfortable grip for some lifters. |
| Barbell skull crushers | A straight bar provides a traditional two-handed setup with a fixed grip. |
| Incline skull crushers | An inclined bench changes shoulder positioning and the resistance pattern. |
| Cable skull crushers | A low pulley behind the bench changes the direction of resistance and allows convenient weight adjustments. |
For a behind-the-head variation, angle your upper arms slightly toward your head before bending your elbows. Keep enough clearance between the weight and the bench, and avoid forcing a deep stretch.
Both the forehead and behind-the-head versions are valid options. Choose the movement that feels comfortable and allows you to maintain control.
Benefits of Skull Crushers
Adding this exercise to your strength-training routine offers several practical benefits:
- Direct triceps training: Challenges the triceps without relying heavily on the chest or shoulders.
- Muscle growth: Consistent resistance training can increase triceps size over time.
- Improved elbow extension strength: Stronger triceps support bench presses, overhead presses, and other pushing movements.
- Training flexibility: Dumbbells, barbells, and cables provide different ways to perform the exercise.
If you already train your chest and shoulders, lying extensions add targeted arm work without requiring another compound pressing exercise.
Common Skull Crushers Form Mistakes to Avoid
Good technique matters because the weight travels close to your head. Small mistakes can become more noticeable as fatigue builds.
| Common Mistake | How to Fix It |
| Using too much weight | Reduce resistance until every repetition feels controlled. |
| Excessive elbow flaring | Keep your elbows in a comfortable position without forcing them inward. |
| Swinging your upper arms | Maintain a relatively stable shoulder position. |
| Bending your wrists backward | Keep your wrists comfortably aligned with your forearms. |
| Lowering too quickly | Control the descent and avoid bouncing. |
| Training through joint pain | Stop and reassess your load, exercise choice, or range of motion. |
Small natural changes in elbow position are not necessarily a problem. Controlled, comfortable movement matters more than holding your joints at an exact angle.
Skull Crushers Sets, Reps, and Weight
There is no universal starting weight. Choose resistance that challenges your triceps while allowing you to complete every repetition smoothly.
| Training Level | Sets | Repetitions |
| Beginner | 2 | 12–15 |
| Intermediate | 3 | 10–15 |
| Experienced | 3–4 | 8–15 |
These are practical starting ranges, not fixed requirements. Rest approximately 60–120 seconds between sets, or longer if needed to maintain good technique. Leave roughly two or three repetitions in reserve, particularly when lifting above your face.
Mayo Clinic’s strength-training guidance recommends increasing resistance gradually as your muscles become stronger.
For example, if you can complete three sets of 15 with 10-pound dumbbells and good control, try the smallest available weight increase. If your technique deteriorates, return to the lighter load.
One or two weekly sessions can be a reasonable starting point, depending on your other pressing and triceps exercises.
Skull Crushers vs. Triceps Pushdowns
Both exercises strengthen your triceps, but their setups and resistance patterns differ.
| Feature | Skull Crushers | Triceps Pushdowns |
| Body position | Lying down | Standing |
| Upper-arm position | Raised | Near your sides |
| Equipment | Dumbbells, bar, or cable | Cable or resistance band |
| Main advantage | Direct training with raised arms | Convenient loading and setup |
Pushdowns may be easier for beginners to control because the resistance does not travel over the face. Skull crushers offer a different arm position and can complement pushdowns in the same workout.
Other alternatives include overhead dumbbell extensions, overhead cable extensions, close-grip bench presses, and close-grip push-ups. Neither exercise is essential for everyone.
Are Skull Crushers Bad for Your Elbows?
Not necessarily. However, some lifters experience elbow discomfort, especially when using excessive resistance, increasing training volume too quickly, or forcing an uncomfortable range of motion.
Start with a lighter warm-up set and increase resistance gradually. If you experience discomfort, try a shorter comfortable range of motion or neutral-grip dumbbells. Switching to cable pushdowns may also help.
Stop the exercise if you experience sharp pain, and seek advice from a qualified healthcare professional if pain or swelling persists.
Conclusion
Skull crushers are a useful addition to an arm workout when performed with control and appropriate resistance. Start with light dumbbells or an EZ bar, keep your upper arms relatively steady, and increase the weight gradually. If the exercise consistently causes elbow discomfort, choose another triceps movement rather than forcing it. The best training routine is one you can perform safely, comfortably, and consistently.
- Read more: Skull Crushers
Frequently Asked Questions
What are skull crushers good for?
Skull crushers help develop triceps strength and muscle size. Stronger triceps also support performance in bench presses, overhead presses, and other movements involving elbow extension.
Do skull crushers work all three triceps heads?
Yes. They train the long, lateral, and medial heads of the triceps. Shoulder positioning can influence the length of the long head during the exercise.
Are dumbbells or an EZ bar better for skull crushers?
Neither is universally better. Dumbbells allow independent arm movement and a flexible grip, while an EZ bar offers a coordinated two-handed setup. Choose whichever feels more comfortable and controllable.
Can beginners do skull crushers?
Yes. Beginners should start with light resistance and learn proper technique before increasing the weight. Cable pushdowns are another accessible option for people who find lying extensions difficult to control.
Should you lower skull crushers behind your head?
Both forehead and behind-the-head variations are acceptable. Lowering behind your head can change the stretch on your triceps, provided you maintain control and avoid discomfort.
Can you do skull crushers at home?
Yes. A pair of dumbbells and a stable bench are sufficient. You can also perform lying triceps extensions on the floor, although the floor may limit your range of motion.
How often should you train skull crushers?
One or two sessions per week is a reasonable starting point. Adjust your training frequency according to your total triceps workload, recovery, and other pressing exercises.
Should you do skull crushers before or after bench presses?
Usually afterward if bench press strength is your priority. Training your triceps first can fatigue the muscles needed for pressing. If triceps development is your main goal, you may occasionally prioritize isolation exercises earlier in your workout.
How heavy should skull crushers be?
Start with a weight you can lift for 12–15 controlled repetitions without pain or loss of technique. Increase resistance gradually when your current weight becomes easier to manage.
How long does it take to see triceps growth?
Noticeable muscle growth may take several weeks or months of consistent resistance training. Your results depend on training effort, nutrition, recovery, and individual factors. Focus on gradual improvements rather than expecting immediate changes.
